Industrial Ice Maker

  With the needs of social development, the application of artificial ice making is more and more extensive, whether in food, medicine, or in chemical industry, marine fishing, aquatic products, construction and other industries; all kinds of tube ice making machines , especially tube ice. The demand for ice making machines has increased greatly, ranging from beverage shops and bars to large-scale aquatic cold storages and concrete mixing plants, tube ice machines have become very common. Tube ice maker machines are widely used: food, commercial cold drinks, fishery and seafood, tube ice wholesale and retail, pharmaceutical laboratories, etc. Compared with other tube ice machines, the biggest advantage of the tube ice machine is that the ice produced is not easy to melt, the temperature is low, and the hollow middle of the tube has good air permeability, which is irreplaceable. Especially suitable for food, fresh and fresh. Tube Ice Machine Application 1. Tube ice mak...

  9 precautions when using the tube ice machine 1. The tube ice making machine should be installed in a place far away from the heat source, without direct sunlight, and with good ventilation. The ambient temperature should not exceed 35°C to prevent the condenser from being too hot to dissipate heat and affect the ice making effect. The ground on which the tube ice machine is installed should be solid and level, and the tube ice machine must be kept level, otherwise it will cause no ice removal and noise during operation. 2. The gap between the back and the left and right sides of the ice tube machine is not less than 30cm, and the top gap is not less than 60cm. 3. The tube ice maker machine should use an independent power supply, a dedicated line power supply and be equipped with fuses and leakage protection switches, and must be reliably grounded. 4. The water used by the tube ice machine should meet the national drinking water standard, and a water filter dev...

  The meaning of direct-cooling cold storage: the cooling tube of the cold storage evaporator is directly fixed on the storage plate. When the evaporator absorbs heat, the air closer to the cooling tube cools faster, thereby forming natural convection in the co ld storage room , which is gradually realized Integral refrigeration, that is, direct cooling methods, such as common iron row pipes, aluminum row pipes, etc. Air-cooled cold storage means: the cold air generated by the cold storage evaporator is circulated through the fan to force the refrigerating air, so that the cold air is evenly distributed in each compartment of the cold storage to achieve cooling, that is, the cooling method that uses the fan to circulate the cold air. Direct-cooled cold storage Advantages of direct cooling cold storage: 1. Direct cooling type cold storage has simple structure, relatively low failure rate, and low cost resulting in low price. 2. It has a good cooling effect and is...

  Nowadays, there are many brands of salt water ice machines , and some customers do not know which brand to choose. Now let’s talk about the Guangzhou Bingquan brine type ice block machine. CBFI's brine ice block machine has 1-100tons daily capacity. In 2010,  CBFI® Launched a 100-ton 24 hours large-scale fluorine system ice block makers, which was successfully operated in Malaysia and was the first in the world. So what are the advantages of the CBFI brand？ 1.Coil pipe evaporator is CBFI’s invention patent, it has a better evaporating effect with longer lifespan. 2.  CBFI adopts anti-corrosion technology with the surface of the salt water pool , two primers and one top coat, the paint surface is resistant to low temperature, long-term salt water immersion does not fall off, and the service life is more than 35% higher than similar products. 3. Customized ice molds of any size Provided by CBFI 4 .High power water agitator is used to replace the com...

  Industrial ice machines need to be tested for leaks before running. Leak testing covers several aspects. Let’s get to know the methods of leak testing and how to solve the leaks. 1. Intuitive visual leak detection When R22 leaks, the refrigerant oil will also seep or drip out. Using this feature, you can judge whether there is a leak in the place by visual inspection or by touching it with your hands. When the leakage is small and it is not obvious to touch with your fingers, you can wear white gloves or touch the suspicious place with white paper to find the leakage. When oil stains are found somewhere in the refrigeration system, this may be a leakage point. Intuitive visual leak detection is simple and easy, without cost, but has great defects. Unless the system has a large leak that suddenly breaks and the system leaks liquid and colored media, the visual leak detection cannot be located, because the leakage area is usually very large. It is subtle, and ther...

  Some customers will ask what the state of the cold storage room is during normal operation. Today, I will give you a popular science knowledge about the normal operation of the CBFI cold storage room . 1. There should be no noise in the cylinder, only the normal and regular cold storage sound of the suction valve. 2. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature (R22). 3. The condenser cooling water in the cold storage room should be sufficient, the water pressure should be above 0.12mpa, and the water temperature should not be too high. 4. For the new series of products, the reading of the oil pump pressure gauge should be 0.15-0.3mpa higher than the suction pressure 5. There should be no foot heating and frosting on the cylinder wall, and the surface temperature difference should not be greater than 15-20 degrees. For refrigerated or low-temperature systems, frosting of the suction pipe can generally r...

The editor of CBFI, a Chinese ice machine manufacturer , believes that the current domestic and foreign ice making machine have their own characteristics in terms of price, technology, and functions. When companies purchase chiller equipment, they can follow the "four requirements" to help companies purchase compressor equipment. When, choose the one that suits you best. 1. To compare equipment The same PLC is controlled and the same man-machine interface is operated, but the number and methods of control points are very different. There will be qualitative differences in the reliability, safety, stability, accuracy, and sensitivity of the equipment. Of course, the manufacturing cost of the equipment is different. The selling price will also vary. So don't be overly superstitious about PLC, but also in-depth comparison. 2. Pay attention to functions What are the equipment functions you most want, what are the main ones, and which supplier provides the e...